\

Mô tả

Bộ lưu điện 550KVA model DPH 550KW

 SUMMARY SPECIFICATION Bộ lưu điện 550KVA

1. General Data Specification
Model 550kVA
Type Three phase on-line UPS
Output Power Factor 1
System Capacity 550kVA/550kW (55kW/PM)
PM number Max. 10 PMs in one system cabinet
Technology VFI SS 111, True on-line double-conversion design UPS with DSP chips and IGBT technology
2. Input Data Specification
Nominal AC input voltage 380/220; 400/230; 415/240 (3 phase; 4 wire + G)
Voltage range •Full Load 198-276 / 343-477Vac
•70% Load 132-198 / 229-343Vac
Input frequency •Nominal 50/60 Hz Auto selectable
•Tolerance ± 10Hz
Input power factor •Full Load > 0,99 (Full resistive load)
THDi% •Full Load < 3% Typical @ full load, input THDv% less than 1%
Slew rate 0.8 to 2Hz/sec.
Input current (rated@230V) 839A
Main Input Fuses(Inbuilt) 1250A NH2

3. Output Data

Nominal output power 550kVA
Nominal output power with resistive load 550kW
Nominal AC output voltage. 380/220; 400/230; 415/240 (3 phase; 4 wire + G)
Output waveform. Sine wave
Overall peak efficiency. 0.96
ECO mode. 0.99
Output voltage regulation.
•Static ± 1%
•Dynamic ± 5%
THDv% < 1% Linear load *
3% Nonlinear load
Output current nominal 833A,797A,764A
Output frequency nominal 50 / 60Hz
Frequency stability •With internal oscillator ± 0.05Hz
•With mains synchronize ± 3%
Slew rate 0.8 to 2Hz/sec.
Overload capability < 125%: 10min.
< 150%: 1min.
> 150%: 1sec.
Displacement Angle Between Three Phases 120˚ ± 2˚ (Balanced load)
Crest factor 3 : 1
Voltage Symmetry With Balanced Load ± 1%
Voltage Symmetry With 100% Unbalanced Load ± 1%
Phase Lock Range ± 5%
4. Reserve / Bypass
Nominal AC input voltage 380/220; 400/230; 415/240 (3 phase; 4 wire + G)
Voltage range ± 15% adjustable
Frequency  range 50/60 ± 5Hz Auto selectable
Manual bypass Optional

5. Battery / Charger

Rating voltage (default) ± 240 Vdc
Number of batteries per string (Default). 40 pcs
Protection fuses(Inbuilt) 1200A aR type
Recharging capability (Selectable) 5 -50A for full load
5 -150A for load under 90%
Recharge voltage – Float. ±272V
Recharge voltage – Boost. ±280V
Low battery shutdown (Default). ± 210Vdc
Temperature voltage compensation Yes, with optional temperature sensor.
Battery test Manual, automatic, periodic
6. Operation
Transfer time On-line mode Main power failure 0ms
UPS to bypass < 1ms
Bypass to UPS < 1ms
Eco mode Main power failure ± 2ms
-Main power recover 0ms
Transfer voltage On-line mode AC → Battery 132 ± 4V (198 ± 4V, Load > 70%), 276 ± 4V
Battery → AC 142 ± 4V (208 ± 4V, Load > 70%), 266 ± 4V
Eco mode -Normal range ± 10V (Rated voltage)
UPS operation modes
Normal mode Single / Parallel Yes
Back-up mode Single / Parallel Yes
Electronic Bypass Single / Parallel Yes
Manual Bypass Optional
Hot Standby Redundancy Yes
Dry Contact Inbuilt
Common Battery Yes
ECO mode Yes
Frequency Converter Yes
Redundant function Yes
Green Mode Yes

7. Communication

True RS232 DB9 Female Protocol DELTA (Regular Format)
Version 1.57A
SNMP(web management Card- optional) Protocol DELTA (Regular Format)
Version 1.57A
Interface Port RS232x1
USB Port x 1
Remote emergency power off (REPO) Yes
Management Software Included Yes
Dry contacts Optional
SNMP IPV6 Inbuilt
ModBUS RTU (for monitoring) In-built x 1 channel
Programmable Relay Input Card In-built  x 4 channel
Programmable Relay Output Card In-built  x 6 channel
Touch screen display Inbuilt
Enviro Probe Optional
Additional output relay card Optional
MFC Card for LiB monitoring Integration Optional
8. Environment
Audible noise level (EN 50091) at 1 meter < 70 dBA*
Operation altitude 1000 meter
Operating temperature range Full load 0°C to 40°C
75% load 40°C to 50°C
When the operating temperature increase from 40°C to 50°C the capacity reduce from 100% to 75% linearly.
Storage temperature range – 25˚C to 70˚C
Relative humidity <95% (non-condensing)
IP Protection. IP 20
Air flow for cooling. 6040 m-cube/hr. 3556 CFM
9. Compliance
Safety CE/ECM/TISI
Vibration ISTA-3B (with packing)
Drop ISTA-3B (with packing)
Performance IEC 62040-3
General and Safety requirements for UPS IEC/EN 62040-1
UPS Electromagnetic Compatibility (EMC) requirements IEC/EN 62040-2 Category C3
Electrostatic Discharge IEC/EN 61000-4-2 Level 4
Radio-Frequency Electromagnetic fields IEC/EN 61000-4-3 Level 3
Fast Transient/Burst IEC/EN 61000-4-4 Level 4
Surges IEC/EN 61000-4-5 Level 4
Conduction Immunity IEC/EN 61000-4-6

10. Dimensions

UPS Dimensions
Height (mm) 2000
Width (mm) 600
Depth (mm) 1100
Weight (kg) 687
Floor loading (kg / m2) 1041
Color code RAL 90005v
11.  Accessories
User Manual I Pc
System & Power Module Test Report for 035 model by factory 1 Each
Parallel Cables (3 meters as standard) 1 Pc
USB Cable 1 Pc
RS 232 Cable 1 Pc
Dust Filter 1 Set
Almex Connector for Dry Contacts 1 Set
11.  Optional Accessories
Relay I/O Card TBD
Enviro Probe (EMS 1000/1100/1200) EMS1000000 EMS1100035
EMS1100009 EMS1200035
EMS1200009
Battery temperature sensor 3915101381-S
Parallel Cable (5 meters for optional) 3081407100-SP
Parallel Cable (10 meters for optional) 3080900100
VRLA BMS
Battery Fuse Box TBD
Bộ lưu điện 550KVA
Bộ lưu điện 550KVA

👉 https://voimt.com/ Hãy đặt nền móng cho sự hợp tác bằng cách gọi cho tôi

(Mr Hoàng) Hotline: 0388454589

Website: Dieuhoachinhxac.com

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Bộ lưu điện 550KVA model DPH 550KW”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

0388454589
0388454589