Uniflair Schneider
Mô tả
Uniflair là một thương hiệu thuộc sở hữu của Schneider Electric, chuyên cung cấp các giải pháp làm mát chính xác (precision cooling) cho các trung tâm dữ liệu, phòng máy chủ và các môi trường công nghiệp khác. Hệ thống làm mát Uniflair được thiết kế để kiểm soát nhiệt độ và độ ẩm một cách chính xác, đảm bảo hoạt động ổn định và hiệu quả của các thiết bị điện tử.
Power supply Uniflair Schneider
• Single power supply
• Double power supply with automatic commutation to provide redundancy and ensure a constant power supply
Construction options
• Downflow units (IDAV): top air return with bottom or front discharge (without additional floor stands)
• Upflow units (IUAV): front or bottom air return with top discharge
• Underfloor units (IXAV): top air return with bottom supply with multiple fan module configurations
• Standard, cleanable or low conductibility humidifier (cooling + humidification configuration)
• Condensate drain pump (cooling only and cooling + dehumidification configurations)
• Standard electrical heaters with extended fins, complete with double safety thermostat and manual resetting
• EU4 (standard) or EU5 air filters with or without motorized damper
• Power phase capacitors (not available for I*AV1511A models)
• Energy meter and CO2 emission calculator
• Automatic Floor Pressurization System through Active Floor Control (AFC)
Additional accessories
• Suction from the top and front discharge plenums: they can be equipped with soundproofed insulation or with high efficiency air filters
• Back and top suction direct free-cooling plenum
• Floor stands (200mm height)
• Floor stands with motorized damper (500mm height)
• Motorized damper
• Adjustable baseframe (200 – 600 mm)
• Fire and smoke sensors
Technical data – Uniflair Schneider IDAV / IUAV |
|||||||
| IDAV models | 1511A | 1922A | 2022A | 2422A | 2922A | 3822A | |
| Fan type | EC backward-curved centrifugal motor fan | ||||||
| Power supply | V/ph/Hz | 400 / 3ph / 50 Hz | |||||
| Fans | nr. | 2 | 2 | 2 | 2 | 2 | 3 |
| Air flow | m3/h | 16800 | 16800 | 17000 | 20000 | 26000 | 27000 |
| Gross total cooling capacity1,2 | kW | 65.6 | 76.2 | 80 | 108.8 | 124 | 156.7 |
| Gross sensible cooling capacity1,2 | kW | 65.6 | 76.2 | 80 | 108.8 | 124 | 156.7 |
| Fan power consumption1,2 | kW | 2.41 | 2.41 | 2.02 | 3.03 | 4.18 | 4.28 |
| Compressor Power Consumption | kW | 12.7 | 13.9 | 13.8 | 20.3 | 21.6 | 31.4 |
| IUAV models | 1511A | 1922A | 2022A | 2422A | 2922A | 3822A | |
| Fan type | EC backward-curved centrifugal motor fan | ||||||
| Power supply | V/ph/Hz | 400 / 3ph / 50 Hz | |||||
| Fans | nr. | 2 | 2 | 2 | 2 | 2 | 3 |
| Air flow | m3/h | 16800 | 16800 | 17000 | 20000 | 26000 | 27000 |
| Gross total cooling capacity1,2 | kW | 65.6 | 76.2 | 80 | 108.8 | 124 | 156.7 |
| Gross sensible cooling capacity1,2 | kW | 65.6 | 76.2 | 80 | 108.8 | 124 | 156.7 |
| Fan power consumption1,2 | kW | 2.41 | 2.41 | 2.02 | 3.03 | 4.18 | 4.28 |
| Compressor Power Consumption | kW | 12.7 | 13.9 | 13.8 | 20.3 | 21.6 | 31.4 |
| 1: Gross cooling capacities; fans must be deducted to obtain net cooling data. 2: Data refer to nominal conditions: Room at 35 °C – 30% RH, condensing temperature 45 °C. |
|||||||
| Technical data – IXAV | ||||
| IXAV models | 2322A | 2622A | 4022A | |
| Fan type | EC backward-curved centrifugal motor fan | |||
| Power supply | V/ph/Hz | 400 / 3ph / 50 Hz | ||
| Fans | nr. | 2 | 2 | 3 |
| Air flow | m3/h | 18800 | 23400 | 30000 |
| Gross total cooling capacity1,2 | kW | 107 | 121.8 | 166.8 |
| Gross sensible cooling capacity1,2 | kW | 107 | 121.8 | 166.8 |
| Fan power consumption1,2 | kW | 2.64 | 3.69 | 4.44 |
| Compressor Power Consumption | kW | 20.4 | 21.7 | 31.3 |
| 1: Gross cooling capacities; fans must be deducted to obtain net cooling data 2: Data refer to nominal conditions: Room at 35 °C – 30% RH, condensing temperature 45 °C. |
||||
Hãy đặt nền móng cho sự hợp tác bằng cách gọi cho tôi
(Mr Hoàng) Hotline: 0388454589
Website: Dieuhoachinhxac.com
Đánh giá
Chưa có đánh giá nào.